HELP with Camp 9 Trigger

alw700 · Post by **alw700** » Wed May 30, 2007 7:35 am

I need some help please. I bought a camp 9. I fired about 100 rds and now the trigger will not reset. I field stipped it down to the trigger group. The hammer spring is sticking out the back about 1/2 inch. I can not get the sear to release so I can get the hammer spring out and take the side plates off to see any trouble. I was afeared to pry it apart after I took the spring ring off the hammer pin with tennson on the spring. I wasn't sure I would be able to find all the parts or put them back in as they go. If no one can help it looks like a trip to the gun DR.
Thanks
Arthur

Sure-Shot · Post by **Sure-Shot** » Wed May 30, 2007 8:32 am

Here are some sites that have assembly/disassembly instructions on the camp 9 The first one specificly covers triggers but is written on how to convert it to automatic. It may or may not have what you need.

Good luck.
http://www.guntrafficker.com/product_in ... ucts_id=14
http://www.theothersideofkim.com/index. ... ead/13110/
http://www.notpurfect.com/main/campgun9.htm