Building a Marlin 1895 Cowboy into a 40-60 Marlin.
Moderators: Regnier (gunrunner), JohnK, Sure-Shot
-
- Beginner
- Posts: 47
- Joined: Thu Mar 06, 2003 6:23 pm
- Location: Three Rivers, Mi
Building a Marlin 1895 Cowboy into a 40-60 Marlin.
I am thinking about building a 40-60 Marlin out of an 1895 Cowboy. I have bought a box of ammo (40-65 Winchester) and tried it for feeding problems. It will feed through the action fine. The next step it to find a gunsmith that will reline the 45-70 barrel to 40-60. I am not sure if the liners are thin enough that it would be a problem going down this far in caliber or not. Any ideas? I already have three 45-70s and like the old cartridges real well and would like to try a 40-60. I think it would be real fun at the cowboy long range shoots.
-
- Beginner
- Posts: 3
- Joined: Mon May 09, 2005 8:12 am
Jim Susemihl
?Which one are you going to build on to the Marlin ?
40-60 or the 40-65 one case is long then the other
Save you money buddy look here
Marlin M-1895 .40/82
http://www.gunbroker.com/Auction/ViewIt ... m=31643011
From left to right
40-60 Win, 40-65 Win, 40-70 Win, 40-72 Win, 40-82 Win, 40 EXP, 405 WCF, 44-60 Win
http://members.shaw.ca/cartridge-corner/idpics.htm
?Which one are you going to build on to the Marlin ?
40-60 or the 40-65 one case is long then the other
Save you money buddy look here
Marlin M-1895 .40/82
http://www.gunbroker.com/Auction/ViewIt ... m=31643011
From left to right
40-60 Win, 40-65 Win, 40-70 Win, 40-72 Win, 40-82 Win, 40 EXP, 405 WCF, 44-60 Win
http://members.shaw.ca/cartridge-corner/idpics.htm
-
- Beginner
- Posts: 2
- Joined: Sat May 21, 2005 9:50 pm
- Location: Coonbranch Mt., WV
- Contact:
Question 4 Garth Dial
You mentioned you have a re-barreled Marlin and the cost was not bad. Can you recomend the person that did the work. I'm very interested is having one built. Also would like to get a 336 built in a 336A style in 38-55 with a half octogon half round 24" bbl. and pistol grip. I'm new to this site, but really glad I found it., Thanks.
- marlinman93
- Distinguished Expert
- Posts: 2858
- Joined: Sun Nov 10, 2002 1:22 pm
- Location: Portland, Oregon
Martin Potts,
I think Jim was referring to the .40-60 Marlin cartridge, or the .40-65 Win. cartridge. The two are almost identical, and actually either will interchange in guns chambered for these calibers.
As you noted the .40-60 W and .40-65 W don't interchange.
I think Jim was referring to the .40-60 Marlin cartridge, or the .40-65 Win. cartridge. The two are almost identical, and actually either will interchange in guns chambered for these calibers.
As you noted the .40-60 W and .40-65 W don't interchange.
Marlin lever actions 1870's-WWI, Ballards, and single shot rifles!