I have a 1904 Marlin Model 21 12 Guage Pump shotgun. It is missing the wooden pump handle. Does anyone know where I can get one or have one made?
Thanks
Chuck
Marlin Model 21 12 Gauge Pump ?
Moderators: Regnier (gunrunner), JohnK, Sure-Shot
-
Regnier (gunrunner)
- Distinguished Expert
- Posts: 4731
- Joined: Sun Oct 27, 2002 2:33 am
- Location: The Sunflower State
Chuck;
The best thing is to watch eBay. Pump action shotgun parts show up there quite often.
According to Brophy, the Model 21 has the early style forearm, which was attached with 2 screws on each side. You would need to find a forearm from either the Model 1898, 17, 19 or 21 to work.
If by chance your shotgun has the later style forearm which is attached by a cap at the end of the slide, then about any of the later shotguns will work as long as they are 12 gauge guns.
I hope this helps.
The best thing is to watch eBay. Pump action shotgun parts show up there quite often.
According to Brophy, the Model 21 has the early style forearm, which was attached with 2 screws on each side. You would need to find a forearm from either the Model 1898, 17, 19 or 21 to work.
If by chance your shotgun has the later style forearm which is attached by a cap at the end of the slide, then about any of the later shotguns will work as long as they are 12 gauge guns.
I hope this helps.