Marlin 20-S firing pin question

Anything to do with Rimfire guns

Moderators: Regnier (gunrunner), JohnK, Sure-Shot

Post Reply
wulffster
Beginner
Posts: 1
Joined: Tue Dec 15, 2020 12:42 pm

Marlin 20-S firing pin question

Post by wulffster »

Picked up a 20-S which wouldn't fire. Opened action, pressed in on firing pin and saw no protrusion. Installed new firing pin which looked exactly the same as old one. No "bang." Removed bolt and firing pin can be pushed past flush with rear of bolt and into recess for cartridge. Hammer hit is strong. Any clues?
palabra
Pro-Marksman
Posts: 89
Joined: Wed May 23, 2007 6:20 am
Location: Norris Lake TN

Re: Marlin 20-S firing pin question

Post by palabra »

How strong is the firing pin dent in the back of the casing? Is it placed on the near edge? If the dent is not very deep, then you have a problem with the length and fitting of the pin, or, it is blocked from protruding when struck by the hammer.
Post Reply