marlin 57m
Moderators: Regnier (gunrunner), JohnK, Sure-Shot
marlin 57m
Can anyone help? When I slowly lever the gun, it ejects perfectly. But when I try quickly, the bolt pulls the shell out and lets go of it leaving it in the gun.Thanks in advance.
-
- Distinguished Expert
- Posts: 4670
- Joined: Sun Oct 27, 2002 2:33 am
- Location: The Sunflower State
Tim;
I would look for two things. A dirty chamber (corrosion, rust, etc) and weak extractor springs. The Model 57 (M)'s have double extractors and the springs could be weak and or dirty and not allowing enough strength to pull the fired cartridge out of the chamber. If you need parts. go to http://www.e-gunparts.com which is Numrich Gun Parts Corporation. You can call their Customer Service at 845-679-4867.
Good luck............
I would look for two things. A dirty chamber (corrosion, rust, etc) and weak extractor springs. The Model 57 (M)'s have double extractors and the springs could be weak and or dirty and not allowing enough strength to pull the fired cartridge out of the chamber. If you need parts. go to http://www.e-gunparts.com which is Numrich Gun Parts Corporation. You can call their Customer Service at 845-679-4867.
Good luck............