Disassembly Of Levermatic Trigger Mechanism

Anything to do with gun smithing.
Post Reply
RANisbet
Beginner
Posts: 14
Joined: Tue Jun 14, 2011 10:53 am

Disassembly Of Levermatic Trigger Mechanism

Post by RANisbet »

I have disassembled Winchesters and others, but never a levermatic.
Am I going to have lots of parts fall all over the bench if I disassemble it.
I need to stone out some nasty trigger creep, but don't know how much time iwill be involved in take-down and reassembly.
Comments/Recommendtions Please.
RANisbet
Beginner
Posts: 14
Joined: Tue Jun 14, 2011 10:53 am

preformed Disassembly Of Levermatic

Post by RANisbet »

Did the disassembly and it was a simple effort.
Nothing "popped" out.
The model 62's lockwork pivots down after removing front and real holding screws.
WHEN THE BOLT PIVOTS DOWN< YOU HAVE COMPELTE ACCESS TO THE BOLT.
Post Reply