Model 36A 30-30 parts List

Any questions related to guns

Moderators: Regnier (gunrunner), JohnK, Sure-Shot

Post Reply
ihmsa53393
Beginner
Posts: 1
Joined: Fri Aug 19, 2016 6:27 pm

Model 36A 30-30 parts List

Post by ihmsa53393 »

Looking for a Model 36A schematic. Need to determine if the extractor and one piece firing pin from a 336 will fit my 36A.
Regnier (gunrunner)
Distinguished Expert
Posts: 4667
Joined: Sun Oct 27, 2002 2:33 am
Location: The Sunflower State

Re: Model 36A 30-30 parts List

Post by Regnier (gunrunner) »

Ihmsa53393;

Wisner's shows they sell the extractor for the Model 36. ( www.wisnersinc.com )
As to the firing pin, I was not aware that Marlin ever made a one piece firing pin for the Model 336. That was always part of the safety system built into the Model 336 that it have a two piece firing pin. The action had to be fully closed to actuate the back half of the firing pin so as to line up the two pieces of the firing pins. Numrich Gun Parts shows that there were two different front half of the firing pins for the Model 336. The early version may work in the Model 36.
Due to the increasing cost of ammunition, there will be no warning shot!

The growing federal deficit = generational slavery to the national debt.

If the world was perfect.......it wouldn't be.
Post Reply