I am currently buying a Marlin No. 32 Standard 1875 pocket rev, .32 RF ca. I'm looking for ammo and I was needing to know if it used short or long ammo. I don't have the pistol yet but wanted ammo here to fire when I get it. Would you happen to know the cylinder lengths? I know the long measures 1 3/16" in total length. The short is 7/8" overall. Any idea?
Thank you,
Bart
Marlin No. 32 Standard 1875 pocket rev, .32 RF ca
Moderators: Regnier (gunrunner), JohnK, Sure-Shot
-
chefbartrd
- Beginner
- Posts: 2
- Joined: Wed Nov 04, 2015 5:08 am
-
Regnier (gunrunner)
- Distinguished Expert
- Posts: 4670
- Joined: Sun Oct 27, 2002 2:33 am
- Location: The Sunflower State
Re: Marlin No. 32 Standard 1875 pocket rev, .32 RF ca
Bart;
You cannot use the long cartridge in the short cylinder, but you can use the short cartridge in the long cylinder. So, if you do not know the cylinder length, get the short cartridges and use them in either cylinder length.
You cannot use the long cartridge in the short cylinder, but you can use the short cartridge in the long cylinder. So, if you do not know the cylinder length, get the short cartridges and use them in either cylinder length.
Due to the increasing cost of ammunition, there will be no warning shot!
The growing federal deficit = generational slavery to the national debt.
If the world was perfect.......it wouldn't be.
The growing federal deficit = generational slavery to the national debt.
If the world was perfect.......it wouldn't be.
-
chefbartrd
- Beginner
- Posts: 2
- Joined: Wed Nov 04, 2015 5:08 am
Re: Marlin No. 32 Standard 1875 pocket rev, .32 RF ca
Thank you. Do you know the length of the cylinder for the short or long? Or are they the same length. The picture I sent what did it look like. I'm sorry to trouble you. Thank you for all your help.
Sincerely,
Bart
Sincerely,
Bart
-
Regnier (gunrunner)
- Distinguished Expert
- Posts: 4670
- Joined: Sun Oct 27, 2002 2:33 am
- Location: The Sunflower State
Re: Marlin No. 32 Standard 1875 pocket rev, .32 RF ca
Bart;
The long cylinder measures 1.180 inches (a little less than 1 1/4 inch ) in length whereas the short cylinder measures .900 in length, or just under 1 inch.
The long cylinder measures 1.180 inches (a little less than 1 1/4 inch ) in length whereas the short cylinder measures .900 in length, or just under 1 inch.
Due to the increasing cost of ammunition, there will be no warning shot!
The growing federal deficit = generational slavery to the national debt.
If the world was perfect.......it wouldn't be.
The growing federal deficit = generational slavery to the national debt.
If the world was perfect.......it wouldn't be.