Marlin Slide Action Model 38
Moderators: Regnier (gunrunner), JohnK, Sure-Shot
Marlin Slide Action Model 38
Where would i find how to break down and clean this rifle. Been stored for a very long time. It has the octagon barrel and has 4 digit serial number. I want to shoot ground hogs with it. So i wanted to clean it.
-
- Distinguished Expert
- Posts: 4674
- Joined: Sun Oct 27, 2002 2:33 am
- Location: The Sunflower State
Re: Marlin Slide Action Model 38
Peleth;
To takedown the Model 38, pull back on the takedown latch ( at top, rear of receiver ) and tip the barrel forward. The action will come apart and then you can reach in and grab the breech bolt to be removed out the back of the receiver. From there, you can clean all of the parts of the Model 38 and clean the barrel from the breech end as is the proper way.
To takedown the Model 38, pull back on the takedown latch ( at top, rear of receiver ) and tip the barrel forward. The action will come apart and then you can reach in and grab the breech bolt to be removed out the back of the receiver. From there, you can clean all of the parts of the Model 38 and clean the barrel from the breech end as is the proper way.
Due to the increasing cost of ammunition, there will be no warning shot!
The growing federal deficit = generational slavery to the national debt.
If the world was perfect.......it wouldn't be.
The growing federal deficit = generational slavery to the national debt.
If the world was perfect.......it wouldn't be.