Color case hardening
Buck,
This is the reason that I'd like to duplicate the process as much as possible from details shown on the film. If I can get the crucible, packing method, dumping method, tank details, temperatures, etc worked out from the film, then I can nail down pretty much all of the variables other than the mix and the chemical makeup of the quench water. Example, hard water, soft water, iron content, etc. I may use distilled water, which is what I use when I normally CCH. So, that leaves the mix as the last controlling variable. I'll
start with straight wood/bone charcoal ratios and see how close I get.
-jim
This is the reason that I'd like to duplicate the process as much as possible from details shown on the film. If I can get the crucible, packing method, dumping method, tank details, temperatures, etc worked out from the film, then I can nail down pretty much all of the variables other than the mix and the chemical makeup of the quench water. Example, hard water, soft water, iron content, etc. I may use distilled water, which is what I use when I normally CCH. So, that leaves the mix as the last controlling variable. I'll
start with straight wood/bone charcoal ratios and see how close I get.
-jim
-
- Beginner
- Posts: 30
- Joined: Thu Apr 20, 2006 9:24 pm
- Location: Papillion, NE
Backtobethel:
I have a number of my own receivers that I will run the first tests on. After that, I don't know. I do CCH as a hobby, not as a business. Depending on how close I get, I may run a batch or two for members for purposes of testing consistancy. If I do, they will have to be pre 1899 since I don't have an FFL, they will have to be polished by someone other than me, and they would have to sign some sort of waiver. (I don't ever have problems with warping, but liability scares the *beep* out of me).
I'm doing this in order to try and further the knowledge and understanding of a long lost process, and to satisfy my own curiousity. I will only CCH someone else's gun if I can closely duplicate original Marlin colors. There's no sense in creating a bunch of 1893s that don't look original.
I'll post pictures on this site after the first run. It might take 1-2 months to get everything set up. I'll keep you posted.....
-jim
I have a number of my own receivers that I will run the first tests on. After that, I don't know. I do CCH as a hobby, not as a business. Depending on how close I get, I may run a batch or two for members for purposes of testing consistancy. If I do, they will have to be pre 1899 since I don't have an FFL, they will have to be polished by someone other than me, and they would have to sign some sort of waiver. (I don't ever have problems with warping, but liability scares the *beep* out of me).
I'm doing this in order to try and further the knowledge and understanding of a long lost process, and to satisfy my own curiousity. I will only CCH someone else's gun if I can closely duplicate original Marlin colors. There's no sense in creating a bunch of 1893s that don't look original.
I'll post pictures on this site after the first run. It might take 1-2 months to get everything set up. I'll keep you posted.....
-jim
I have most of the equipment completed and will be giving this a try in a couple of weeks as soon as I have parts from 4 or 5 guns polished. The equipment matches Marlin's setup as closely as I could determine from the 1920's film. It weighs about 80 lbs when loaded with charcoal and parts. Here's a photo of a "brand W" 1886 that I recently recased and restored:
- Four-Eyed Buck
- Marksman 1st Class
- Posts: 219
- Joined: Thu Jan 23, 2003 9:38 pm
- Location: Canton, Ohio
Thanks Buck! My goal is to get the proper Marlin colors on Marlins using the same equipment and techniques that Marlin used. Everything that I've cased in the past has been done individually in a small crucible. I've had to use some shielding and other techniques to get the colors that you see. The Marlin process is quite different. I hope I don't get a hernia lifting the crucible from the oven to the quench tank!!!
-jim
-jim
- Four-Eyed Buck
- Marksman 1st Class
- Posts: 219
- Joined: Thu Jan 23, 2003 9:38 pm
- Location: Canton, Ohio
- marlinman93
- Distinguished Expert
- Posts: 2858
- Joined: Sun Nov 10, 2002 1:22 pm
- Location: Portland, Oregon
Thanks Vall. The composition of the steel will make a difference if everything else is equal. In this case though the whole quench process will be different. I've color cased half a dozen or so Marlins in the past, using the same method that I use for the 1886's, but I haven't gotten what I consider to be accurate Marlin colors. That's why I'm anxious to try this out. Well, all except for the polishing....
Here's what the setup looks like. The handle is used to lift the crucible out of the oven. The crucible sets on the base on the quench barrel. The lid is lifted off with the hook on the pully and then the crucible is rotated to dump the contents. The open crucible will exposed to air for only a couple of seconds before the contents are dumped.
- marlinman93
- Distinguished Expert
- Posts: 2858
- Joined: Sun Nov 10, 2002 1:22 pm
- Location: Portland, Oregon
Vall,
I haven't tried dumping anything yet, but the center of gravity makes it very easy and quick to turn over. In fact I may have to put a stop on it so it doesn't turn too far. I'm hoping that the centrifugal force will keep the parts and charcoal in the box until they drop in the tank. Marlin didn't use a base like this and simply rolled the handle and crucible to dump it. I thought this would give more consistant results. If I have problems, I'll ditch the base and do it the way Marlin did.
I haven't tried dumping anything yet, but the center of gravity makes it very easy and quick to turn over. In fact I may have to put a stop on it so it doesn't turn too far. I'm hoping that the centrifugal force will keep the parts and charcoal in the box until they drop in the tank. Marlin didn't use a base like this and simply rolled the handle and crucible to dump it. I thought this would give more consistant results. If I have problems, I'll ditch the base and do it the way Marlin did.
-
- Distinguished Expert
- Posts: 1304
- Joined: Sun Nov 17, 2002 5:01 pm
- Location: Poulsbo, Washington, USA
I hope you will have someone film your doing this so we can watch it one time. Great work and I will gladly donate some early 94 receivers if you need more. I have a couple for a project rifle but have not had time to get around to making it yet. No liability and no regrets if anything goes wrong.
GBOT, GBUSA